OCCUPATIONAL SAFETY PROGRAMS

The bloodborne pathogens program (BBP) is a safety program aimed at protecting employees who may be exposed to human blood, primary or established human cell lines, or other potentially infectious materials (OPIM) while at work. Blood or OPIM can contain disease - causing virusis such as Hepatitis B, Hepatitis C, and HIV.

Bloodborne Pathogen Exposure Control Plan

Hepatitis B vaccination is provided at no cost to all Stony Brook University employees who are determined to be at risk of occupational exposure. Employees who have occupational exposure to bloodborne pathogens and OPIM are offered hepatitis B vaccination after they have received the required training. The complete hepatitis B vaccination series, antibody testing to demonstrate immunity, or that the vaccine is contraindicated for medical reasons should be determined in consultation with Stony Brook Medicine’s Center for Occupational Medicine who maintains all related records.

Confirmation of Hepatitis and/or Hepatitis B Vaccination form

Declination Statement for Hepatitis B Vaccine
<

Summary of Requirements
- Cylinders must be handled at high-energy sources. Always transport cylinders with the safety cap installed and use a cylinder cart. Do not roll them by hand along the floor or transport them on forklifts.
- Always store cylinders upright and secure them using an approved lock-down device.
- Always use the correct pressure regulator for the specific gas.
- Do not store cylinders or lecture bottles with the regulator in place. If the regulator fails, the entire contents of the cylinder may be discharged.
- CGA fittings differ for inert gases (e.g., He, Ar, N2), flammable gases (e.g., H2) and oxidizers (e.g., O2, N20)
- Compressed gas cylinders, which contain acutely toxic gases, must be stored in a designated area
- All compressed gas cylinders must be clearly marked with the correct chemical name
- All cylinders should be labeled to indicate if the container is full or empty.
Training

Individuals using compressed gases must be trained in the safe use of the material and pressurized systems. Hazard Communication or Chemical Hygiene training must be provided by Environmental Health and Safety. Primary responsibility for specific operations training is with the employee's supervisor. Environmental Health and Safety may be consulted as necessary.
To obtain a Confined Space Assessment Permit,Contact the Department of Environmental Health and Safety (631-632-6410) or visit 110 Suffolk Hall Stony Brook, NY 11764-6200.
- All information must be filled out accurately by supervisor.
- All special requirements must be noted on the permit.
- A copy of permit must be given to EH&S at the start of the job and returned upon completion.
- Environmental monitoring is required prior to entry, when shift goes beyond 8 hours and/or when conditions change that warrant additional monitoring.

Stony Brook EHS recognizes the interest and benefits of UAS technology. However, we are also aware of the safety concerns surrounding their operation. In saying that we have developed a policy to reduce risks to the safety, security and privacy of people, facilities and operations, and to ensure compliance with Federal Aviation Administration (FAA) regulations.

Complete the Drone Application

UAS operations are strictly prohibited over the campus or inside campus buildings, except under the following circumstances, when approved by EH&S.
- Operations deemed to be necessary to support the mission of the Stony Brook University academic, research and medical programs.
- Operations that are essential to an administrative, business, facility maintenance, police, fire or emergency function of the University.
- Students who are members of a Stony Brook club or program that is directly related to flying UAS (e.g. Innovation Lab, RC Flying Club, etc.), may request to fly their UAS “For Fun” at a designated location at the R&D Park.
- Hobby or recreational use of UAS by others is not permitted.
Working with electricity can be dangerous. Engineers, electricians, and other professionals work with electricity directly, including working on overhead lines, cable harnesses, and circuit assemblies. Others, such as office workers and sales people, work with electricity indirectly and may also be exposed to electrical hazards.

Electricity has long been recognized as a serious workplace hazard. OSHA's electrical standards are designed to protect employees exposed to dangers such as electric shock, electrocution, fires, and explosions.

Lockout Tagout Policy

Training requirements apply to employees who face a risk of electrical shock that is not reduced to a safe level by the electrical installation requirements of 1910.303 through 1910.308. Employees in occupations facing a higher than normal risk of electrical incidents are required to be trained. Additionally, employees who may reasonably be expected to face comparable risk of injury due to electric shock or other electrical hazards must also be trained. Employees shall be trained in, and become familiar with, the safety-related work practices required by 1910.331 through 1910.335 that pertain to their respective job assignments.
Employees must be trained and equipped to prevent injuries associated with slip, trip and fall hazards. Employees assigned to train other employees, competent person, shall be trained through a qualified fall protection training program.

Equipment associated with fall protection (ropes, harnesses, ladders, scaffolding, etc.) must be inspected frequently and removed from use if damaged or defective. Walking and working surfaces must be inspected frequently to identify, correct and plan protection for potential fall hazards.

Summary of Requirements
- Each employer shall be responsible for the safe condition of tools and equipment used by employees, including tools and equipment which may be furnished by employees.
- Compressed air shall not be used for cleaning purposes except where pressure is reduced to less than 30psi, and then only with safety glasses with side shields.
- Provide proper personal protective equipment and have employees wear it (e.g. safety glasses, hand and arm protection, hearing protection, etc.)
- Tools must be equipped with appropriate safety switches (type is dependent on blade shrank or wheel size) and must not be loaded until just prior to the intended firing time (e.g. nail gun).
- In general, all tools and blades must be in a good condition and have the appropriate guarding. Blades of a fan must be guarded when less than 7 feet off the floor or work level.
- Use the right tool for the job and keep it in a safe place.
- Train employees to select the right tools for each job.

[back to Occupational Safety]